Setra Model 265 Very Low Differential Pressure Transducer for Air or Inert Gases
SETRA MODEL 265 VERY LOW DIFFERENTIAL PRESSURE TRANSDUCER
Setra Systems 265 pressure transducers sense differential or gauge (static) pressures and convert this pressure difference to a proportional electrical output. The 265 is offered with a high level 0-5 VDC output or a 4-20 mA output. It is also offered with 0-5 or 0-10 VDC output in the 24 VAC excitation version. Used in Building Energy Management Systems, these transducers are capable of measuring pressures and flows with the accuracy necessary for proper building pressurization and air fl ow control. The 265 Series very low pressure transducers are available for air pressure ranges as low as 0.25 in. WC full scale up to 100 in. WC full scale. Static accuracy is Â±1% full scale in normal ambient temperature environments. The units are temperature compensated to less than Â±0.033% FS/oF of thermal error over the temperature range of 0oF to +150oF. The Model 265utilizes an improved all stainless steel microtig welded sensor. The tensioned stainless steel diaphragm and insulated stainless steel electrode, positioned close to the diaphragm, form a variable capacitor. Positive pressure moves the diaphragm toward the electrode, increasing the capacitance. A decrease in pressure moves the diaphragm away from the electrode, decreasing the capacitance. The change in capacitance is detected and converted to a linear DC electrical signal by Setraâ€™s unique electronic circuit. The microtig welded tension sensor allows up to 10 PSI overpressure (range dependent) with no damage to the unit. In addition, the sensor parts have thermally matched coefficients, which promote improved temperature performance and excellent long-term stability.
|Pressure Media||Air or Inert Gases|
Write Your Own Review